S&B Filters Polaris General Particle Separator

Dust Buster

S&B Filters has an updated Particle Separator ($399) for 2016-18 Polaris General UTVs. S&B says its Particle Separator ejects 94 percent of the dust before it reaches your stock filter, so you won’t have to replace your filter as frequently.

S&B Filters Polaris General Particle Separator

The way the Particle Separator works is dirty air enters vortex tubes, where the dirt is separated from the air. Dirt exits the back, while the clean and filtered air is sent back to the stock air filter.

S&B Filters Polaris General Particle Separator

S&B Filters Polaris General Particle Separator

S&B Filters Polaris General Particle Separator

The Particle Separator’s versatile billet clamps allow it to be installed in many positions. It can be installed on either the upper or lower roll bars of your UTV, and it works with most roof configurations. If you have a custom cage or roof, larger clamp and spacer kits are sold separately if needed to ensure a secure fit to your UTV.

S&B Filters Polaris General Particle Separator

S&B Filters Polaris General Particle Separator

S&B Filters Polaris General Particle Separator

When installed on the upper roll bar, the Particle Separator provides RAM air to the engine. With this additional airflow, your Polaris General will maintain its performance in horsepower and fuel economy.

S&B Filters Polaris General Particle Separator

S&B Filters Polaris General Particle Separator

In this video, Katie Kelly shows how to install the S&B Filters Particle Separator in a 2018 Polaris General:

S&B Filters Particle Separator Installation for the 2016-2018 Polaris General

COMPANY DETAILS

S&B Filters logo

Company

S&B Filters

Website

www.sbfilters.com

Connect

Contact

Contact

Phone

(800) 358-2639

Address

15461 Slover Ave

Fontana CA 92337

ABOUT S&B Filters®

S&B Filters is a manufacturer of cold air intakes, filters and other performance parts, specializing in diesel/gas trucks and SUVs. More than 30 years ago, S&B Filters started with a simple mission: to become a manufacturer of the most technically advanced high-performance filter on the market. Holding true to their goal, they engineer intake systems to greatly reduce airflow restriction, while still protecting your engine. They test their products against the competitors, following ISO 5011 standards. They keep their quality high and pricing low by making almost everything themselves in the U.S.

COMPANY VIDEO